Prof. Dr. Nicola Pinna

Profil

• Atomar dünn beschichtete poröse Elektroden als neuartige Katalysatoren für die Wasser-Elektrolyse

  Quelle ↗

  Förderer: Bundesministerium für Forschung, Technologie und Raumfahrt Zeitraum: 11/2018 - 04/2022 Projektleitung: Prof. Dr. Nicola Pinna

• AvH-Forschungskostenzuschuss: Ewa Wierzbicka

  Quelle ↗

  Förderer: Alexander von Humboldt-Stiftung: Forschungskostenzuschuss Zeitraum: 09/2020 - 01/2022 Projektleitung: Prof. Dr. Nicola Pinna

• AvH Mehmet Zahmakiran

  Quelle ↗

  Förderer: Alexander von Humboldt-Stiftung Zeitraum: 01/2015 - 01/2017 Projektleitung: Prof. Dr. Nicola Pinna

• Development of Advanced Renewable Photocatalytic Hydrogen Generation Technology

  Quelle ↗

  Zeitraum: 10/2013 - 09/2015 Projektleitung: Prof. Dr. Nicola Pinna

• DFG-Sachbeihilfe: Structure-Properties Correlations on Carbon-Metal Chalcogenides Nanostructured Electrocatalysts

  Quelle ↗

  Förderer: DFG Sachbeihilfe Zeitraum: 11/2019 - 09/2023 Projektleitung: Prof. Dr. Nicola Pinna

• Entwicklung eines adaptiven und multifunktionalen vernetzenden Sensorsystems zur Erkennung und Lokalisierung von Gefahren zum Schutz des Waldes (TP HU)

  Quelle ↗

  Förderer: Bundesministerium für Landwirtschaft, Ernährung und Heimat Zeitraum: 02/2017 - 01/2019 Projektleitung: Prof. Dr. Nicola Pinna, PD Dr. Werner Moritz

• Entwicklung magnetisch leitfähiger Elastomere mit 3D-Druck für induktive Übertrager mit Anwendungsentwicklung

  Quelle ↗

  Förderer: BMWE: ZIM Zeitraum: 07/2018 - 06/2020 Projektleitung: Prof. Dr. Klaus Rademann, Prof. Dr. Nicola Pinna

• Entwicklung von wenig löslichen, homodispers nanoskopischen Metallfluoriden in Zahnzementen, Kompositfüllmaterialien und in Prophylaxepräparaten zum Einsatz im Dentalbereich

  Quelle ↗

  Förderer: Bundesministerium für Wirtschaft und Energie Zeitraum: 04/2018 - 09/2020 Projektleitung: Prof. Dr. Nicola Pinna

• Innovative interfaces for energy-related applications

  Quelle ↗

  Zeitraum: 01/2014 - 12/2017 Projektleitung: Prof. Dr. Nicola Pinna

• Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  Quelle ↗

  Zeitraum: 07/2012 - 03/2015 Projektleitung: Prof. Dr. Nicola Pinna

• Nano-Fluoride als Kathoden: Ein Weg zu Li-Ionen-Batterien mit hoher Energiedichte

  Quelle ↗

  Förderer: DFG Sachbeihilfe Zeitraum: 12/2015 - 11/2018 Projektleitung: Prof. Dr. Nicola Pinna

• PREIS - Junge Spitzenforscher

  Quelle ↗

  Förderer: Andere inländische Stiftungen Zeitraum: 01/2014 - 12/2023 Projektleitung: Prof. Dr. Nicola Pinna

• SFB 1109/1: Oxid-Nanostrukturen: Wachstum, Wachstumsmechanismen und Oberflächenaktivität untersucht durch Atomlagenabscheidung (TP C04)

  Quelle ↗

  Förderer: DFG Sonderforschungsbereich Zeitraum: 04/2014 - 12/2017 Projektleitung: Prof. Dr. Nicola Pinna

• 3dk.berlin BERNHARDT Kunststoffverarbeitungs GmbH

  KPT

  23 Treffer85.0%
  • Entwicklung magnetisch leitfähiger Elastomere mit 3D-Druck für induktive Übertrager mit Anwendungsentwicklung
    K

    85.0%

• PlasmaChem GmbH

  KPT

  56 Treffer85.0%
  • Mitigation of risk and control of exposure in nanotechnology based inks and pigments
    K

    85.0%

• Krebs Engineers GmbH

  KPT

  23 Treffer85.0%
  • Entwicklung magnetisch leitfähiger Elastomere mit 3D-Druck für induktive Übertrager mit Anwendungsentwicklung
    K

    85.0%

• Torrecid

  KPT

  53 Treffer85.0%
  • Mitigation of risk and control of exposure in nanotechnology based inks and pigments
    K

    85.0%

• Ardeje Sarl

  KPT

  64 Treffer85.0%
  • Mitigation of risk and control of exposure in nanotechnology based inks and pigments
    K

    85.0%

• Tec Star S.r.l.

  KPT

  54 Treffer85.0%
  • Mitigation of risk and control of exposure in nanotechnology based inks and pigments
    K

    85.0%

• Pinturas Monto SA

  KPT

  58 Treffer85.0%
  • Mitigation of risk and control of exposure in nanotechnology based inks and pigments
    K

    85.0%

• nanofluor GmbH

  KPT

  104 Treffer85.0%
  • Entwicklung von wenig löslichen, homodispers nanoskopischen Metallfluoriden in Zahnzementen, Kompositfüllmaterialien und in Prophylaxepräparaten zum Einsatz im Dentalbereich
    K

    85.0%

• Heraeus Battery Technology GmbH

  PT

  114 Treffer63.2%
  • Optimierte Natrium-Feststoffbatterien mit neuen Anoden basierend auf Kohlenstoffgerüststrukturen
    P

    63.2%

• GREENoneTEC Solarindustrie GmbH

  P

  15 Treffer61.8%
  • Solar Collectors made of Polymers
    P

    61.8%

• Nanostructured Materials for Room‐Temperature Gas Sensors

  2015

  Advanced Materials · 1549 Zitationen · DOI

  Sensor technology has an important effect on many aspects in our society, and has gained much progress, propelled by the development of nanoscience and nanotechnology. Current research efforts are directed toward developing high-performance gas sensors with low operating temperature at low fabrication costs. A gas sensor working at room temperature is very appealing as it provides very low power consumption and does not require a heater for high-temperature operation, and hence simplifies the fabrication of sensor devices and reduces the operating cost. Nanostructured materials are at the core of the development of any room-temperature sensing platform. The most important advances with regard to fundamental research, sensing mechanisms, and application of nanostructured materials for room-temperature conductometric sensor devices are reviewed here. Particular emphasis is given to the relation between the nanostructure and sensor properties in an attempt to address structure-property correlations. Finally, some future research perspectives and new challenges that the field of room-temperature sensors will have to address are also discussed.

• Two‐Dimensional Nanostructured Materials for Gas Sensing

  2017

  Advanced Functional Materials · 825 Zitationen · DOI

  Two‐dimensional (2D) nanostructures are highly attractive for fabricating nanodevices due to their high surface‐to‐volume ratio and good compatibility with device design. In recent years 2D nanostructures of various materials including metal oxides, graphene, metal dichalcogenides, phosphorene, BN and MXenes, have demonstrated significant potential for gas sensors. This review aims to provide the most recent advancements in utilization of various 2D nanomaterials for gas sensing. The common methods for the preparation of 2D nanostructures are briefly summarized first. The focus is then placed on the sensing performances provided by devices integrating 2D nanostructures. Strategies for optimizing the sensing features are also discussed. By combining both the experimental results and the theoretical studies available, structure‐properties correlations are discussed. The conclusion gives some perspectives on the open challenges and future prospects for engineering advanced 2D nanostructures for high‐performance gas sensors devices.

• Atomic Layer Deposition of Nanostructured Materials for Energy and Environmental Applications

  2012

  Advanced Materials · 577 Zitationen · DOI

  Atomic layer deposition (ALD) is a thin film technology that in the past two decades rapidly developed from a niche technology to an established method. It proved to be a key technology for the surface modification and the fabrication of complex nanostructured materials. In this Progress Report, after a short introduction to ALD and its chemistry, the versatility of the technique for the fabrication of novel functional materials will be discussed. Selected examples, focused on its use for the engineering of nanostructures targeting applications in energy conversion and storage, and on environmental issues, will be discussed. Finally, the challenges that ALD is now facing in terms of materials fabrication and processing will be also tackled.

• Galvanic Replacement Reactions in Metal Oxide Nanocrystals

  2013

  Science · 534 Zitationen · DOI

  Galvanic replacement reactions provide a simple and versatile route for producing hollow nanostructures with controllable pore structures and compositions. However, these reactions have previously been limited to the chemical transformation of metallic nanostructures. We demonstrated galvanic replacement reactions in metal oxide nanocrystals as well. When manganese oxide (Mn3O4) nanocrystals were reacted with iron(II) perchlorate, hollow box-shaped nanocrystals of Mn3O4/γ-Fe2O3 ("nanoboxes") were produced. These nanoboxes ultimately transformed into hollow cagelike nanocrystals of γ-Fe2O3 ("nanocages"). Because of their nonequilibrium compositions and hollow structures, these nanoboxes and nanocages exhibited good performance as anode materials for lithium ion batteries. The generality of this approach was demonstrated with other metal pairs, including Co3O4/SnO2 and Mn3O4/SnO2.

• Surfactant‐Free Nonaqueous Synthesis of Metal Oxide Nanostructures

  2008

  Angewandte Chemie International Edition · 465 Zitationen · DOI

  Surfactant-free nonaqueous (and/or nonhydrolytic) sol-gel routes constitute one of the most versatile and powerful synthesis methodologies for nanocrystalline metal oxides with high compositional homogeneity and purity. Although the synthesis protocols are particularly simple, involving only metal oxide precursors and common organic solvents, the obtained uniform nanocrystals exhibit an immense variety of sizes and shapes. The small number of reactants in these routes enables the study of the chemical mechanisms involved in metal oxide formation. Nonhydrolytic routes to inorganic nanomaterials that used surfactants as size- and shape-controlling agents have been discussed recently. This Minireview supplements this topic by discussing surfactant-free processes, which have become a valuable alternative to surfactant-assisted as well as to traditional aqueous sol-gel chemistry routes.

• Electrospun Nanomaterials for Supercapacitor Electrodes: Designed Architectures and Electrochemical Performance

  2016

  Advanced Energy Materials · 419 Zitationen · DOI

  Electrospinning is the most facile and highly versatile approach to produce 1D polymeric, inorganic, and hybrid nanomaterials with a small diameter, controllable dimensions, and designed architectures. In particular, with large surface area, high porosity, low density, good directionality, and tunable composition, electrospun nanofibers and mats are regarded as ideal candidates for various kinds of electrochemical energy storage devices such as supercapacitors (SCs). In this review, the recent progress in electrospun electrode materials for SCs is presented, covering the architecture design and their electrochemical performance. After a brief introduction about SCs, the basic principles of the electrospinning technique are discussed. Following, attention is paid to the discussion of various electrospun nanofibers and mats including 1D carbons, metal oxides, metal sulfides, metal nitrides, conducting polymers and composite nanomaterials with various types of architectures as electrodes for SCs. The relationship between the composition, architecture, and the electrochemical performance is discussed in detail. Finally, some challenges and perspectives of future research of the electrospun nanofibers and mats for high performance SCs are highlighted. It is anticipated that this review would provide the researchers some inspiration for constructing new types of energy storage devices.

• Ni Strongly Coupled with Mo₂C Encapsulated in Nitrogen‐Doped Carbon Nanofibers as Robust Bifunctional Catalyst for Overall Water Splitting

  2019

  Advanced Energy Materials · 401 Zitationen · DOI

  Abstract It is urgently required to develop highly efficient and stable bifunctional non‐noble metal electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for water splitting. In this study, a facile electrospinning followed by a post‐carbonization treatment to synthesize nitrogen‐doped carbon nanofibers (NCNFs) integrated with Ni and Mo 2 C nanoparticles (Ni/Mo 2 C‐NCNFs) as water splitting electrocatalysts is developed. Owing to the strong hydrogen binding energy on Mo 2 C and high electrical conductivity of Ni, synergetic effect between Ni and Mo 2 C nanoparticles significantly promote both HER and OER activities. The optimized hybrid (Ni/Mo 2 C(1:2)‐NCNFs) delivers low overpotentials of 143 mV for HER and 288 mV for OER at a current density of 10 mA cm −2 . An alkaline electrolyzer with Ni/Mo 2 C(1:2)‐NCNFs as catalysts for both anode and cathode exhibits a current density of 10 mA cm −2 at a voltage of 1.64 V, which is only 0.07 V larger than the benchmark of Pt/C‐RuO 2 electrodes. In addition, an outstanding long‐term durability during 100 h testing without obvious degradation is achieved, which is superior to most of the noble‐metal‐free electrocatalysts reported to date. This work provides a simple and effective approach for the preparation of low‐cost and high‐performance bifunctional electrocatalysts for efficient overall water splitting.

• Chlorine intercalation in graphitic carbon nitride for efficient photocatalysis

  2016

  Applied Catalysis B: Environmental · 388 Zitationen · DOI

• Amorphous layer around aragonite platelets in nacre

  2005

  Proceedings of the National Academy of Sciences · 368 Zitationen · DOI

  We reveal that the aragonite CaCO3 platelets in nacre of Haliotis laevigata are covered with a continuous layer of disordered amorphous CaCO3 and that there is no protein interaction with this layer. This finding contradicts classical paradigms of biomineralization, e.g., an epitaxial match between the structural organic matrix and the formed mineral. This finding also highlights the role of physicochemical effects in morphogenesis, complementing the previously assumed total control by biomolecules and bioprocesses, with many implications in nanotechnology and materials science.

• Metal Oxide Nanoparticles in Organic Solvents

  2009

  Engineering materials and processes · 358 Zitationen · DOI

• Magnetite Nanocrystals:  Nonaqueous Synthesis, Characterization, and Solubility

  2005

  Chemistry of Materials · 349 Zitationen · DOI

  A novel nonaqueous route has been applied for the preparation of nanocrystalline magnetite. In a simple one-pot reaction process, iron(III) acetylacetonate was dissolved in benzyl alcohol and treated in an autoclave between 175 and 200 °C. This approach leads to monocrystalline magnetite particles with sizes ranging from 12 to 25 nm, as evidenced by X-ray analysis, HRTEM, and Raman and Mössbauer spectroscopy. The isolated particles can be redispersed either in polar or nonpolar solvents by coating them just after synthesis with undecanoic acid or dopamine. Simple sedimentation after redispersion in hexane can be used to lower the polydispersity of the sample.

• Periodically ordered nanoscale islands and mesoporous films composed of nanocrystalline multimetallic oxides

  2004

  Nature Materials · 341 Zitationen · DOI

• Nonaqueous Synthesis of Nanocrystalline Semiconducting Metal Oxides for Gas Sensing

  2004

  Angewandte Chemie International Edition · 331 Zitationen · DOI

  Superior crystallinity and good yields are found for SnO2 and In2O3 (see HRTEM image) semi-conducting metal oxide nanocrystals prepared by a non-aqueous approach involving the reaction of a metal alkoxide with benzyl alcohol. The sensor devices fabricated just by deposition of the as-synthesized nanoparticles showed the high sensitivity and good recovery time required for technological applications.

• Highly Crystalline Cubic Mesoporous TiO₂ with 10-nm Pore Diameter Made with a New Block Copolymer Template

  2004

  Chemistry of Materials · 311 Zitationen · DOI

  A strategy is shown to fabricate highly organized mesoporous anatase films exhibiting favorable properties for photocatalysis and photovoltaic applications by the hydrolysis/condensation of TiCl4 in the presence of PHB−PEO block copolymer templates. Dipcoating for evaporation-induced-self-assembly followed by a straight thermal treatment was employed. The evaporation/structuration process and the thermal treatment were mechanistically followed by in situ GISAXS/WAXS measurements, and the final product was carefully analyzed by spectroscopic ellipsometry and transmission electron microscopy to reveal the consequences of crystallization onto the micro-, the meso-, and the macroscale.

• A General Soft‐Chemistry Route to Perovskites and Related Materials: Synthesis of BaTiO₃, BaZrO₃, and LiNbO₃ Nanoparticles

  2004

  Angewandte Chemie International Edition · 300 Zitationen · DOI

  Perovskite nanoparticles were obtained by treating alkali or alkaline-earth metals dissolved in benzyl alcohol with transition metal alkoxides, which is a novel and generally applicable route to nanosized perovskites and related materials. In the picture, the synthetic route to BaTiO3 nanocrystals is superimposed on a high-resolution TEM image of a single nanoparticle.

• MoS₂ Van der Waals p–n Junctions Enabling Highly Selective Room‐Temperature NO₂ Sensor

  2020

  Advanced Functional Materials · 291 Zitationen · DOI

  Abstract Van der Waals p–n junctions of 2D materials present great potential for electronic devices due to the fascinating properties at the junction interface. In this work, an efficient gas sensor based on planar 2D van der Waals junctions is reported by stacking n‐type and p‐type atomically thin MoS 2 films, which are synthesized by chemical vapor deposition (CVD) and soft‐chemistry route, respectively. The electrical conductivity of the van der Waals p–n junctions is found to be strongly affected by the exposure to NO 2 at room temperature (RT). The MoS 2 p–n junction sensor exhibits an outstanding sensitivity and selectivity to NO 2 at RT, which are unavailable in sensors based on individual n‐type or p‐type MoS 2 . The sensitivity of 20 ppm NO 2 is improved by 60 times compared to a p‐type MoS 2 sensor, and an extremely low limit of detection of 8 ppb is obtained under ultraviolet irradiation. Complete and very fast sensor recovery is achieved within 30 s. These results are superior to most of the previous reports related to NO 2 detection. This work establishes an entirely new sensing platform and proves the feasibility of using such materials for the high‐performance detection of gaseous molecules at RT.

• Room‐Temperature Hydrogen Sensing with Heteronanostructures Based on Reduced Graphene Oxide and Tin Oxide

  2012

  Angewandte Chemie International Edition · 283 Zitationen · DOI

  There's something in the air … A nanocomposite consisting of well-dispersed SnO(2) and Pt nanoparticles on reduced graphene oxide (see the high-resolution TEM image) exhibited very high responses to hydrogen at concentrations between 0.5 and 3% in air, with response times of 3-7 s and recovery times of 2-6 s. The sensor was prepared by a straightforward microwave-assisted non-aqueous sol-gel approach.

• Platinum single atoms on tin oxide ultrathin films for extremely sensitive gas detection

  2020

  Materials Horizons · 282 Zitationen · DOI

  Single atom Pt significantly improves the sensing performances of ultrathin SnO₂ films for detection of triethylamine.

• Nonaqueous and Halide-Free Route to Crystalline BaTiO₃, SrTiO₃, and (Ba,Sr)TiO₃ Nanoparticles via a Mechanism Involving C−C Bond Formation

  2004

  Journal of the American Chemical Society · 277 Zitationen · DOI

  A novel nonaqueous route for the preparation of nanocrystalline BaTiO(3), SrTiO(3), and (Ba,Sr)TiO(3) has been developed. In a simple one-pot reaction process, the elemental alkaline earth metals are directly dissolved in benzyl alcohol at slightly elevated temperatures. After the addition of Ti(O(i)Pr)(4), the reaction mixture is heated to 200 degrees C, resulting in the formation of a white precipitate. XRD measurements prove the exclusive presence of the perovskite phase without any other crystalline byproducts such as BaCO(3) or TiO(2). TEM investigations reveal that the BaTiO(3) nanoparticles are nearly spherical in shape with diameters ranging from 4 to 5 nm. The SrTiO(3) particles display less uniform particle shapes, and the size varies between 5 and 10 nm. Lattice fringes observed in HRTEM measurements further prove the high crystallinity of the nanoparticles. Surprisingly, GC-MS analysis of the reaction solution after hydrothermal treatment shows that hardly any ether formation occurs during the BaTiO(3) synthesis. Instead, the presence of 4-phenyl-2-butanol in stoichiometric amounts gives evidence that the formation mechanism proceeds mainly via a novel pathway involving C-C bond formation between benzyl alcohol and the isopropanolate ligand.

• Superstructures of Calcium Carbonate Crystals by Oriented Attachment

  2005

  Crystal Growth & Design · 264 Zitationen · DOI

  Crystalline hexagonal-shaped superstructures of calcium carbonate, synthesized in the presence of ammonia, are shown to be assembled by a three-dimensional oriented attachment of vaterite nanoparticles. This unusual crystallographic lock-in mechanism enables the formation of complicated rounded structures with a crystallographic orientation from nanosized building blocks, which has so far only been found for transition metal systems.

• Ligand‐Directed Assembly of Preformed Titania Nanocrystals into Highly Anisotropic Nanostructures

  2004

  Advanced Materials · 257 Zitationen · DOI

  Highly anisotropic TiO 2 nanostructures (see Figure) of several hundreds of nanometers in length were obtained by oriented assembly of preformed TiO 2 nanoparticles with typical diameters of 5 nm. The assembly is directed by a particularly small amount of a polydentate ligand with a low molecular weight, which binds selectively to specific crystal faces of the titania nanoparticles.

• Recent Advances in Multimetal and Doped Transition-Metal Phosphides for the Hydrogen Evolution Reaction at Different pH values

  2021

  ACS Applied Materials & Interfaces · 235 Zitationen · DOI

  Hydrogen is a fuel with a potentially zero-carbon footprint viewed as a viable alternative to fossil fuels. It can be produced in a large scale via electrochemical water splitting using electricity derived from renewable sources, but this would require highly active, inexpensive, and stable hydrogen evolution reaction (HER) catalysts to replace the Pt benchmark. Transition-metal phosphides (TMPs) are potential Pt replacements owing to their generally high activity as well as versatility as HER catalysts for different pH media. This review summarizes the recent progress in the development of TMP HER electrocatalysts, focusing on the strategies that have been recently explored to tune the activity in acidic, neutral, and basic media. These strategies are the doping of TMPs with metal and nonmetal elements, fabrication of multimetallic phosphide phases, and construction of multicomponent heterostructures comprising TMPs and another component such as a different TMP or a metal oxide/hydroxide. The synthetic methods utilized to design the catalysts are also presented. Finally, the challenges still remaining and future research directions are discussed.

• Single Crystal Manganese Oxide Multipods by Oriented Attachment

  2005

  Journal of the American Chemical Society · 233 Zitationen · DOI

  Nonhydrolytic sol-gel processes in organic solvents have become very popular for the synthesis of metal oxide NCs. We report an affordable, high-yield, shape-control synthesis of MnO multipod nanocrystals with a quick reaction time. The reaction yields exclusively multipods; two to six pod nanocrystals are synthesized. The mechanism leading to this hierarchical nanostructure is studied in relation with an oriented attachment mechanism; all nanocrystals are found to be single crystals. The study is completed by high-resolution TEM, X-ray powder diffraction, and magnetic measurements.

• Edge-enriched WS2 nanosheets on carbon nanofibers boosts NO2 detection at room temperature

  2021

  Journal of Hazardous Materials · 216 Zitationen · DOI

• A General Nonaqueous Route to Binary Metal Oxide Nanocrystals Involving a C−C Bond Cleavage

  2005

  Journal of the American Chemical Society · 216 Zitationen · DOI

  A widely applicable solvothermal route to nanocrystalline iron, indium, gallium, and zinc oxide based on the reaction between the corresponding metal acetylacetonate as metal oxide precursor and benzylamine as solvent and reactant is presented. Detailed XRD, TEM, and Raman studies prove that, with the exception of the iron oxide system, where a mixture of the two phases magnetite and maghemite is formed, only phase pure materials are obtained, gamma-Ga(2)O(3), zincite ZnO, and cubic In(2)O(3). The particle sizes lie in the range of 15-20 nm for the iron, 10-15 nm for the indium, 2.5-3.5 nm for gallium, and around 20 nm for zinc oxide. GC-MS analysis of the final reaction solution after removal of the nanoparticles showed that the composition is rather complex consisting of more than eight different organic compounds. Based on the fact that N-isopropylidenebenzylamine, 4-benzylamino-3-penten-2-one, and N-benzylacetamide were the main species found, we propose a detailed formation mechanism encompassing solvolysis of the acetylacetonate ligand, involving C-C bond cleavage, as well as ketimine and aldol-like condensation steps.

• 3dk.berlin BERNHARDT Kunststoffverarbeitungs GmbH

  Entwicklung magnetisch leitfähiger Elastomere mit 3D-Druck für induktive Übertrager mit Anwendungsentwicklung

  company

• Acondicionamiento Tarrasense Association

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  ngo

• Ardeje Sarl

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  company

• Centre national de la recherche scientifique

  Innovative interfaces for energy-related applications

  other

• Consiglio Nazionale delle Ricerche

  Innovative interfaces for energy-related applications

  other

• Heriot-Watt University

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  university

• Institute of Occupational Medicine

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  research_institute

• Instituto Tecnológico del Embalaje, Transporte y Logística

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  other

• Krebs Engineers GmbH

  Entwicklung magnetisch leitfähiger Elastomere mit 3D-Druck für induktive Übertrager mit Anwendungsentwicklung

  company

• nanofluor GmbH

  Entwicklung von wenig löslichen, homodispers nanoskopischen Metallfluoriden in Zahnzementen, Kompositfüllmaterialien und in Prophylaxepräparaten zum Einsatz im Dentalbereich

  company

• Nanotechnology Industries Association

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  ngo

• Pinturas Monto SA

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  other

• PlasmaChem GmbH

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  company

• Technische Universität Clausthal

  Entwicklung magnetisch leitfähiger Elastomere mit 3D-Druck für induktive Übertrager mit Anwendungsentwicklung

  university

• Tec Star S.r.l.

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  other

• Torrecid

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  other

• Universidad de Zaragoza

  Innovative interfaces for energy-related applications

  university

• Universität Aveiro

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  university

• Universitat Jaume I

  Innovative interfaces for energy-related applications

  university

• Yeditepe Universität

  Mitigation of risk and control of exposure in nanotechnology based inks and pigments

  university

Name

Prof. Dr. Nicola Pinna

Titel

Prof. Dr.

Fakultät

Zentralinstitut Center for the Science of Materials Berlin

Telefon

+49 30 2093-7245

HU-FIS-Profil

Quelle ↗

Zuletzt gescrapt

26.4.2026, 01:10:28